Cleaning And Care; Troubleshooting; Disposal Considerations; Declaration Of Conformity - Klarstein 10028451 Handbuch

Warning- Always disconnect from the mains supply before cleaning heater. For general cleaning use a
soft clean duster - never use harsh abrasive or cleaners. The glass viewing screen should be cleaned
carefully with a soft cloth. DO NOT use proprietary glass cleaners.
This product does not use a standard bulb for its fl ame eff ect. The appliance uses an electronically
controlled LED system to create the eff ect, therefor no parts need to be replaced. There are no user-
serviceable parts on this appliance. Under no circumstances should the appliance be serviced be
anyone other than a qualifi ed electrician.
Symptom
No operation/no fan.
No fi re eff ect light.
According to the European waste regulation 2002/96/EC this symbol on the product
or on its packaging indicates that this product may not be treated as household was-
te. Instead it should be taken to the appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this product is disposed of correct-
ly, you will help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailled information about recycling of this product, please
contact your local council or your household waste disposial service.
Your product contains batteries covered by the European Directive. 2006/66/EC, which cannot be
disposed of with normal household waste. Please check local rules on separate collection of batteries.
The correct disposal of batteries helps prevent potentially negative consequences on the environ-
ment and human health.
Producer: CHAL-TEC GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European Directives:
2014/30/EU (EMC)
2014/35/EU (LVD)
2011/65/EU (RoHS)
11

Cleaning and Care

Troubleshooting

Disposal Considerations

Declaration of Conformity

Solution
Check fuse by replacement.
Check for safety cut-off operation.
Check the LED system by qualifi ed electrician.