Troubleshooting - Klarstein Vulsini Bedienungsanleitung

TROUBLESHOOTING

Problem
EE" is displayed on the
screen.
88" is displayed on the
screen.
The screen displays "OP".
No power, the logs do
not glow.
Possible cause
Short circuit.
No warm air is blown out
and the fan does not work.
The open window warning
(if the ambient temperature
drops by 4 °C/ 8°F or
more within 10 minutes
and the temperature does
not rise within 42 minutes)
is activated and the unit
turns off automatically.
The power plug is not
plugged in.
Approach
Contact customer service
to have the thermostat
sensor replaced
Set the power switch to
the "off" position and wait
at least 10 minutes. Then
return the power switch to
the "on" position.
Inspect the appliance
and make sure that the
air inlets and outlets are
not blocked, as this could
cause the appliance to
overheat. Unplug the
appliance from the power
outlet for 30 minutes to
allow the appliance to
cool down. Then, plug
the power plug back
into the power outlet and
turn the appliance on.
If the problem persists,
contact your service
representative.
Make sure that the power
plug of the machine is
plugged into a 220-240V
power outlet. Press the
power button several times
and make sure that the
power switch is in the "on"
position.
EN
47