Klarstein SAINT HELENS STUDIO LOFT 2 Bedienungsanleitung Seite 44

EN
44
Function
Setting
Weekly timer
Description
When the unit is on or in standby, press and hold
the settings icon on the remote control for 3 seconds
or press and hold the timer button on the control
panel for 3 seconds in standby. The display flashes
[00:00]. First set the current time. Press the [+] button
on the remote control to set the hour and the [-]
button to set the minute.
After setting the current time, press the settings
icon again to activate the weekly timer, then press
the calendar icon to select Sunday to Saturday.
The selected date lights up. Then press the settings
icon to set the switch-off time and switch-on time in
succession, and then press the OK button directly to
complete the weekly timer settings.
Note: The current time must be set after switching on
or off for the first time, otherwise the clock remains
in the "00:00" state and the timer function cannot
be used
The clock lights up automatically when the power
supply is switched on. The clock automatically
switches off the display after 60 seconds in standby
mode. Press any function key to then display the
clock again.
If you are not in settings mode, press the calendar
icon directly to select the weekly timer setting.