Klarstein Koloss Handbuch Seite 63

Step 7: bind up pipe
1. Bind up the connection pipe, power cord and drain hose with the band.
indoor unit
Step 8: place the indoor unit
1. Put the bound pipes in the wall pipe and then
make them pass through the wall hole.
2. Stuff the gap between pipes and wall hole with
sealing gum.
3. Fix the wall pipe.
Do not bend the drain hose too
excessively in order to prevent
blocking.
63
indoor and outdoor power cord
gas
pipe
band
drain hose
wall pipe
liquid pipe
indoor outdoor
sealing gum