Operation; Using The Hand Blender - Silvercrest SSSM 600 A1 Bedienungsanleitung

Operation

Using the hand blender

WARNING! RISK OF INJURY!
► The food being processed must not be too hot! Splashing contents could
scald the user.
Once you have assembled the hand blender (see section "Assembly"), proceed
as follows:
1) Insert the plug into the mains power socket.
CAUTION! PROPERTY DAMAGE!
► The base of the hand blender
before you switch the appliance on or off. Otherwise the contents may
splash out of the mixing bowl! Always insert the hand blender
food you are processing before starting the appliance!
2) Hold down the
the speed control
control
3) Hold down the turbo button
pressing the turbo button
speed.
4) Once you are done processing the food, simply release the pressed
button
5) Pull the hand blender
NOTE
SSSM 600 A1
button
1
towards "Max" to increase the speed. Turn the speed
1
towards "Min" to decrease the speed.
2/3
.
5
2/3
button and the blade has stopped turning.
If you hear unusual noises during operation, e.g.
squeaking or similar, apply a small amount of neutral
cooking oil to the drive shaft of the hand blender
5
must be completely covered with ingredients
2
to process the food at a normal speed. Turn
3
to process the food at a high speed. By
3
, you immediately start processing at maximum
out of the mixture once you have released the
5
into the
5
.
GB │ IE │
9 ■