Hand Blender Assembly; Smoothie Maker Assembly - Silvercrest SSSM 600 A1 Bedienungsanleitung

Hand blender assembly

WARNING! RISK OF INJURY!
► The blade is extremely sharp! Handle it with great care at all times.
1) Fit the hand blender
the motor unit
2) Turn the hand blender
to the

Smoothie maker assembly

WARNING! RISK OF INJURY!
► The blade is extremely sharp! Handle it with great care at all times.
WARNING! RISK OF INJURY!
► Never screw the blade holder
without the blender jug
holder
1) Place the blade holder
extends into the blender jug
blender jug
CAUTION! PROPERTY DAMAGE!
► To turn the blade holder
turn the blender jug
ingredients will spill out!
2) Now connect the blade holder
jug
motor unit
symbol on the blade holder
3) Then turn the blade holder
points to the
│ GB │ IE
■ 8
5
onto the motor unit
4
points to the
5
symbol and the hand blender
8
6
first!
6
8
.
6
8
! Otherwise the blender jug
8
!) to the motor unit
4
so that the arrow
symbol on the blade holder
4
symbol on the hand blender
until the arrow on the motor unit
5
clicks firmly into place.
6
with the blade
. Always fit the blender jug
onto the blender jug
8
. Screw the blade holder
, only hold the blade holder
6
(together with the attached blender
4
. To do this, fit the blade holder
on the motor unit
6
.
6
so that the arrow
6
so that the arrow
5
.
4
points
7
onto the motor unit
8
onto the blade
8
so that the blade
6
firmly onto the
6
and never try to
8
will detach and the
6
onto the
4
points to the
on the motor unit
and clicks firmly into place.
SSSM 600 A1
on
4
7
4