Siemens SIMATIC NET CP 5511 Installationsanleitung Seite 54

Warning
Installation and Before installation and startup, read the instructions in the appropriate
documentation. You will find ordering data in the catalogs or you can
Startup
contact your local Siemens representative.
Installation and startup is not permitted until it has been established that
the machine in which these components will be installed meets the
conditions of the directive 89/392/EEC.
Notes for the User
Text Conventions The following symbol is used to draw your attention to the text. It has
the following significance:
This symbol highlights special features and dangers.
Registered SIMATIC NET and SINEC are registered trademarks of Siemens AG.
The other names in this manual may be registered trademarks whose
trademarks
use by third parties for their own purposes might infringe upon the rights
of the owner.
The reproduction, transmission or use of this document or
its contents is not permitted without express written
authority.
Offenders will be liable for damages. All rights, including
rights created by patent grant or registration of a utility or
design, are reserved.
© SIEMENS AG 1998 All rights reserved
Order No.: C79000-Z8974-C70-02
Order from Gerätewerk Karlsruhe
Printed in the Federal Republic of Germany
We have checked the contents of this manual for agreement with
the Hardware and software described. Since deviations cannot be
precluded entirely, we cannot guarantee full agreement. However,
the data in this manual are reviewed regularly and any necessary
corrections included in subsequent editions. Suggestions for
improvement are welcome.
Technical data subject to change
Siemens Aktiengesellschaft