GE ADTS542F Sicherheitshinweise- Und Installationsanleitung Seite 8

The ADTS Touch can contain one Lithium-ion battery which is housed in the battery
compartment of the ADTS Touch.
2.1 Replacing the battery
Note: Only use batteries that have been supplied by or purchased from GE.
Prior to replacing the battery, switch the ADTS Touch off. If the ADTS Touch is connected
to the umbilical cable or Docking connector, disconnect prior to removing the battery
cover plate.
1. Unscrew the two thumbscrews (5) of the battery compartment cover plate and
remove the cover plate.
[EN] English
Figure 3 ADTS Touch umbilical cable connector
5
Figure 4 ADTS Touch battery compartment
8
4
5
K0554 Revision B