The test set status indications are as follows:
4a
4b 4c
Test set status indications (4):
4a
4b
4c
4d
If the self test fails, or for any other reason the test set is considered to be
unserviceable, contact GE and return the test set to the GE or GE approved service
centre.
K0554 Revision B
4d
Figure 6 Test set status indications
Power on and self test:
-
Off (power Off)
-
Standby (Yellow)
-
Self test in progress (Green (flashing))
-
Pass/Ready (Green)
-
Fault (Red)
Battery pack status (if fitted - ADTS542F only):
-
For LED indications, see User Manual K0553 "ADTS542F battery
pack"
®
Bluetooth
wireless technology connection status:
-
Wireless connection present (blue)
-
Wireless connection enabled (flashing blue)
-
Wireless connection fault (red)
-
Wired connection disabled (off)
Aircraft status:
-
When the ADTS is controlling the aircraft and it is "off ground", the
LED will be Yellow
-
When the ADTS is controlling the aircraft to "going to ground", the
LED will flash yellow
-
When the ADTS has made the aircraft "safe at ground", the LED is
green
-
In standby-mode, this LED will be off.
11
[EN] English