Machine Maintenance - ANYcUBIC Photon Mono Benutzerhandbuch

FAQ and Machine Maintenance
1. FAQ
Model does not stick to platform.
Bottom exposure time is insufficient, increase the exposure time.
•
Contact area between the model and platform is small, please add raft.
•
Bad leveling.
•
Layer separation or splitting.
• The machine is not stable during printing.
• FEP film in the vat is not tight enough or it need a change for new one.
The printing platform or vat is not tightened.
•

2. Machine maintenance

1. If Z axis makes noisy sound,
please apply lubricant to
Z lead screw
2. Do not use sharp objects to
scrape off the residues on the
FEP film