Safety Instructions - ANYcUBIC Photon Mono Benutzerhandbuch

Safety Instructions

Always follow the safety instructions during assembly and usage, to avoid any
unnecessary damage to the 3D printer or individual injury.
Please contact our customer service first if you have any issue after receiving
the products.
Be cautious when using the scraper. Never direct the scraper towards your
hands.
In case of emergency, please immediately cut off the power of
3D printer and contact the technical support.
It is recommended to use protection glasses when cleaning / sanding
the printed models to avoid small particles contacting eyes.
Keep the
children.
Vapors or fumes may be irritating at operating temperature.
Always use the
ranging 8
limits may result in low quality printing.
Do not disassemble
if you have any question.
3Dprinter includes moving parts that can cause injury.
3D printer and its accessories out of the reach of
3D printer in an open and well ventilated area.
3D printer must not be exposed to water or rain.
3D printer is designed to be used within ambient temperature
0 C-40 0 C, and humidity ranging 20%-50%. Working outside those
3D printer, please contact technical support