ANYcUBIC Photon Mono Benutzerhandbuch Seite 30

(8) Support Settings
When the model has obvious suspended parts or overhang, it needs to add support to
minimize the printing failure.
Click on the model and then click
support tab to edit the support for
the model.
Before adding support, you can edit
the shape of the support. There are
three types of support, Light,
Medium and Heavy.
Light: Contact area between the
support and model is small, and the
support is easy to remove;
Heavy: Support contact with the
model area is large and solid.
It is recommended to try the
"Medium" first and use the
default settings.
And you can always modify the
support settings to fit your
requirement.