Manipulate 3D Model In Photon Workshop - ANYcUBIC Photon Mono Benutzerhandbuch

1. Open, save, undo and redo.
2. Model mirror, hollow and infill, punching, text paste and spilt model - explained in the
following parts.
3. Click to switch the preset view.
4. Switch between slice/machine settings and support settings.
5. Drag the slider to preview each layer of the model.
6. 3D model preview.
7. Click to slice.
8. Move, rotate, scale and layout.
9. Click to switch to the AutoConfig Mode.

3. Manipulate 3D model in Photon Workshop

(1) Model Importing
After software has been installed, please run it first. On the menu bar, Click "Configure"
→ "Machine Type" → "Photon Mono".
Note: Different machine types have different printing parameters.
Users need to choose the correct machine.
On the menu bar, click "File" → "Open file" (or click the "Open" icon at the top left (red
square)) to import your own three-dimensional format model, i.e. STL file or OBJ file. Or
you may input the test file (TEST.stl) in the memory stick.