ANYcUBIC Photon Mono Benutzerhandbuch Seite 14

First Print Instructions
1. Print
Insert the USB memory (the test file" TEST.pwmo" has been saved in it) into the USB
port. Then wear masks and gloves, slowly pour the resin into the vat and the resin
cannot exceed the maximum scale in the vat.
After that, cover the lid and the side with sticker needs to face backward.
Take off the gloves, select the "TEST.pwmo" test file and start printing. (The printing time
on the screen is for reference only, we make no guarantee that it is the actual printing
time.)
If you think the resin is insufficient to finish an ongoing print (or you wish to change the
resin color), you can click "Pause", the platform will rise, and you can slowly pull (or
change) the resin into the vat. After that, click "Start" to resume.
click to pause
Do not exceed the
maximum scale on
the vat
Sticker
click to start