ANYcUBIC Photon Mono Benutzerhandbuch Seite 12

6. Finger press on top of the platform gently, to let it fit evenly on the curing screen.
Then tighten the four screws on the platform.
7. Lastly, click "Tools" → "Z=0" on the touch screen, and then click "Enter" on the pop-up
window. Till now, the leveling process is finished. Click "Enter" again on the pop-up
window and pull out A4 paper.
8. Testing UV light: Click "Tools" → "Detection", select a image and the test time, and then
click "Next" on the screen as shown below. The curing screen should display a complete
image as you select. Otherwise, the UV light is malfunction and please contact the tech
support.