Removing Tools; Attaching Bowl Lid; Removing Bowl Lid; Processing - Bosch MUM-Serie 2 Gebrauchsanleitung

en operation
Select the tool required.
1.
→ "Overview of tools", Page 30
Press the tool into the main drive
2.
until it engages.
→ Fig.
7
To insert the kneading hook:
3.
Insert the kneading hook with
‒
the protective cap fitted in the
main drive.
Turn the protective cap until the
‒
kneading hook engages fully.
→ Fig.
8
The protective cap
the main drive completely.
7.6 Removing tools
▶ Pull the tool completely out of the
drive.
→ Fig. 9
7.7 Attaching bowl lid
Requirements
¡ The required tool is used here.
¡ The bowl has been inserted.
¡ The swivel arm is closed.
Press the release button, raise the
1.
swivel arm slightly and hold in
place.
→ Fig. 10
Lift the lid slightly at the front, slide
2.
fully onto the bowl and set down.
→ Fig. 11
The filling shaft must face towards
the front.
Push the swivel arm down until it
3.
engages.
→ Fig.
12
7.8 Removing bowl lid
Press the release button, raise the
1.
swivel arm slightly and hold in
place.
Lift the lid slightly at the front and
2.
pull it out towards the front.
32
must cover
Push the swivel arm up until it en-
3.
gages.
7.9 Processing
You can find out everything you need
to know about processing food here.
Recommended speeds
Observe the recommended speeds
for optimum results.
Setting Use
1-2 Stir in and mix ingredients.
3 Knead heavy dough, e.g.
yeast dough.
5-7 Beat and stir ingredients,
e.g. whipped cream.
Briefly beat and stirr in-
gredients at maximum
speed.
→ "Using instantaneous
switching", Page 33
Processing ingredients with tools
Requirements
¡ The bowl has been inserted.
¡ The required tool is inserted.
Add the ingredients to the bowl.
1.
Press the release button and push
2.
the swivel arm down until it en-
gages.
Insert mains plug.
3.
Set the rotary switch to the re-
4.
quired speed.
→ Fig.
13
Process the ingredients until you
5.
achieve the required result.
Set the rotary switch to
6.
→ Fig. 14
Wait until the appliance stops.
Unplug the mains plug.
7.
Tips
¡ You can change the speed at any
time during processing or interrupt

processing.

⁠ .