Removing Tools; Attaching Bowl Lid; Removing Bowl Lid; Processing - Bosch MUMS2-Serie Gebrauchsanleitung

To insert the kneading hook:
3.
Insert the kneading hook with
‒
the protective cap fitted in the
main drive.
Turn the protective cap until the
‒
kneading hook engages fully.
→ Fig.
8
The protective cap
the main drive completely.
7.6 Removing tools
Pull the tool completely out of the
▶
drive.
→ Fig.
9
7.7 Attaching bowl lid
Requirements
¡ The required tool is used here.
¡ The bowl has been inserted.
¡ The swivel arm is closed.
Press the release button, raise the
1.
swivel arm slightly and hold in
place.
→ Fig.
10
Lift the lid slightly at the front, slide
2.
fully onto the bowl and set down.
→ Fig.
11
The filling shaft must face towards
the front.
Push the swivel arm down until it
3.
engages.
→ Fig.
12
7.8 Removing bowl lid
Press the release button, raise the
1.
swivel arm slightly and hold in
place.
Lift the lid slightly at the front and
2.
pull it out towards the front.
Push the swivel arm up until it en-
3.
gages.
must cover
7.9 Processing
You can find out everything you need
to know about processing food here.
Recommended speeds
Observe the recommended speeds
for optimum results.
Setting Use
1-2 Stir in and mix ingredients.
1-2 Knead heavy dough, e.g.
yeast dough.
3-4 Beat and stir ingredients,
e.g. whipped cream.
Processing ingredients with tools
WARNING
Risk of injury!
Rotating drives, tools or accessory
parts may cause injury.
Keep hands, hair, clothing and
▶
utensils away from rotating parts.
Only attach and remove tools and
▶
accessories once the drive has
stopped and you have unplugged
the appliance.
Before changing tools or cleaning
▶
the appliance, switch off and dis-
connect it from the mains.
Only use the tools when the bowl
▶
is inserted, the lid is fitted and the
drive covers are in place.
Switch on the appliance only if all
▶
preparations are complete and the
swivel arm is engaged in the posi-
tion described.
Never open the swivel arm during
▶

processing.

Never leave the appliance
▶
switched on if the power supply is
interrupted. The appliance will
automatically start up again follow-
ing the interruption in the power
supply.
Basic operation en
33