Inserting Bowl; Removing Bowl; Inserting Tools; Removing Tools - Bosch MUM5X Serie Gebrauchsanleitung

7.3 Inserting bowl
Place the bowl in the base unit.
1.
→ Fig.
8
Use the recesses on the base unit.
Turn the bowl anticlockwise until it
2.
engages.
→ Fig.
9
7.4 Removing bowl
Turn the bowl clockwise and re-
▶
move.
→ Fig.
10
7.5 Inserting tools
Select the tool required.
1.
→ "Overview of tools", Page 38
Press the tool into the main drive
2.
until it engages.
→ Fig.
11
To insert the kneading hook:
3.
Insert the kneading hook with
‒
the protective cap fitted in the
main drive.
Turn the protective cap until the
‒
kneading hook engages fully.
→ Fig.
12
The protective cap
the main drive completely.
7.6 Removing tools
Pull the tool completely out of the
▶
drive.
→ Fig.
13
7.7 Attaching bowl lid
Requirements
¡ The required tool is used here.
¡ The bowl has been inserted.
¡ The swivel arm is closed.
Press the release button, raise the
1.
swivel arm slightly and hold in
place.
→ Fig.
14
must cover
Lift the lid slightly at the front, slide
2.
fully onto the bowl and set down.
→ Fig.
15
The filling shaft must face towards
the front.
Push the swivel arm down until it
3.
engages.
→ Fig.
16
7.8 Removing bowl lid
Press the release button, raise the
1.
swivel arm slightly and hold in
place.
Lift the lid slightly at the front and
2.
pull it out towards the front.
Push the swivel arm up until it en-
3.
gages.
7.9 Processing
You can find out everything you need
to know about processing food here.
Recommended speeds
Observe the recommended speeds
for optimum results.
Tool or access-
ory
Basic operation en
Setting
1-7
1-5
1-3
1
3-5
3-7
3-7
3-5
7
41