Fan Mode; Dry Mode; Auto Mode; Modalità Automatica - DeLonghi FRIO 12 Installationsanleitung

FAN MODE

Fan mode
To activate fan mode (FAN), press the MODE key until the
( ) symbol comes up on the display next to the word FAN.
Every time the FAN button is pressed the speed changes in
the following sequence: AUTO – LOW – MEDIUM – HIGH.
The remote control also stores the speed that was set in the
previous mode of operation.
In AUTO mode, the air conditioner automatically chooses the
fan speed and the mode of operation (COOLING or HEAT-
ING).

DRY MODE

Dehumidifying mode
To activate drying mode (DRY), press the MODE key until
the ( ) symbol comes up on the display next to the word
DRY.
The appliance activates according to the room and the set
temperature:
temperature, the compressor and the outdoor unit stop
while the indoor unit fan operates at low speed.
temperature, the appliance automatically passes to the
dehumidifying function, activating the fan at low speed.

AUTO MODE

Modalità automatica
To activate AUTO (automatic) mode, press the MODE key
on the remote control until the (
display next to the word AUTO.
In AUTO mode, fan speed, operating mode and tempera-
ture will all be set automatically to produce a comfortable
climate based on the ambient temperature.
Room temperature
Between 22°C
22 ~ 24°C
Above 26°C
While AUTO mode is active, the temperature is not shown
on the display.
) symbol comes up on the
Modr
HEATING
DRY
COOLING
USER
USER
USER
9