Fan Mode; Dry Mode; Smart Mode - DeLonghi ONE Inverter 9K Installationsanleitung

FAN MODE

Fan mode
Press the MODE button until the FAN ( ) symbol appears.
Every time the FAN button
es in the following sequence: AUTO – LOW – MEDIUM –
HIGH. The remote control also stores the speed that was
set in the previous mode of operation.
In SMART mode , the air conditioner automatically choos-
es the fan speed and the mode of operation (COOLING or
HEATING).
Note:
Once the fan speed has been set the indicator lights
start to blink from the lowest to the tallest at a speed that var-
ies according to the set fan speed.
See the table to the side for an example.

DRY MODE

Dehumidifying mode
Press the MODE button until the DRY symbol (
appears.
The appliance activates according to the room and the set
temperature:
temperature, the compressor and the outdoor unit stop
while the indoor unit fan operates at low speed.
temperature, the appliance automatically passes to the
dehumidifying function, activating the fan at low speed.

SMART MODE

Modalità automatica
B Logic Remote Control (Fig. 1):
To activate the SMART function, press the SMART button
( ) on the remote control. The writing SMART
appear on the remote control display.
F Logic Remote Control (Fig. 2):
To activate the SMART (automatic) mode of operation
press the MODE button on the remote control until the
symbol appears on the display.
In the AUTO mode the fan speed and the temperature are
set automatically according to the room temperature to
ensure user comfort.
Room temperature
between 22°C
22 ~ 24°C
above 26°C
Note: after having stopped the SMART function, the air
conditioner will start up with the settings of the previously
selected modes.
ENGLISH
10
, is pressed the speed chang-
will
will
Modr
HEATING
DRY
COOLING
ON
!
Indoor unit display
Blinking Set speed
Slow Minimum fan speed
Medium Medium fan speed
Fast Maximum fan speed
)
MODE
-
ON
AM
OFF TIMER
Fig. 1
MODE
-
Fig. 2
MODE
-
ON
INTELLIGENT REMOTE CONTROL
OFF
INTELLIGENT REMOTE CONTROL
+
OFF
INTELLIGENT REMOTE CONTROL
+
MODE
+
-
OFF
SINGLE SPLIT
USER
USER
°C
USER
°C
+