Fan Mode; Dry Mode; Smart Mode; Modalità Automatica - DeLonghi Kyoto PLK130 Bedienungsanleitung

FAN MODE

Press the MODE button until the FAN ( ) symbol appears.
Every time the FAN button
in the following sequence: AUTO – LOW – MEDIUM – HIGH.
The remote control also stores the speed that was set in the
previous mode of operation.
In SMART mode ( ), the air conditioner automatically choos-
es the fan speed and the mode of operation (COOLING or
HEATING).
Note:
Once the fan speed has been set the indicator lights
will start to blink from the lowest to the tallest at a speed that
varies according to the set fan speed.
See the table to the side for an example.

DRY MODE

Dehumidifying mode
Press the MODE button until the DRY symbol ( ) appears.
The appliance activates according to the room and the set
temperature:
temperature, the compressor and the outdoor unit stop
while the indoor unit fan operates at low speed.
temperature, the appliance automatically passes to the
dehumidifying function, activating the fan at low speed.

SMART MODE

Modalità automatica
To activate the SMART (automatic) mode of operation press
the MODE button on the remote control until the symbol
appears on the display.
In the SMART mode the fan speed and the temperature
are set automatically according to the room temperature to
ensure user comfort.
Room temperature
Between 22°C
22 ~ 24°C
Above 26°C
Note: after having stopped the SMART function, the air
conditioner will start up with the settings of the
previously selected modes.
10
, is pressed the speed changes
Modr
HEATING
DRY
COOLING
!
Indoor unit display
Blinking Set speed
Slow
Minimum fan speed
Medium Medium fan speed
Fast Maximum fan speed
!
USER
USER
USER