Sleep Mode; Another Functions; Auxiliary Switch - DeLonghi FRIO 12 Installationsanleitung

SLEEP MODE

Night mode
To activate sleep mode while the unit is in COOL, DRY or
HEAT mode, press the SLEEP key. (
display next to the word SLEEP.
To deactivate the night function, press the SLEEP button
again.
During operation in the night mode, the set temperature
increases by 1 °C in the first hour of operation and by
another 1 °C in the following hour, maintaining this increase
of 2°C in the subsequent hours.
Selecting the night function in the heating mode, the set
temperature decreases by 1 °C in the first hour of operation
and by another 1 °C in the following hour, maintaining this
decrease of 2°C in the subsequent hours with the fan oper-
ating at minimum speed.

ANOTHER FUNCTIONS

LOCK function (if present)
onds activates the LOCK function (which locks out the key-
pad). If the remote controller is locked, pressany botton, the
remote control can't work, you must unlock the keyboard.
together again.
Switch between Centigrade and Fahrenheit (if present)
To change the unit of measurement from °C to °F and vice
versa, press the MODE and (-) buttons together while the
unit is switched off.
Switching off the unit display
Where necessary (indoor unit located in bedroom), the unit
FAN keys together for at least 3 seconds.

AUXILIARY SWITCH

If the remote control is broken or malfunctioning, the unit
may be switched on and off using the auxiliary switch 1.
Switching on
- With the unit switched off, press the auxiliary switch and
the air conditioner will start up in AUTO mode
Switching off
- With the unit switched on, press the auxiliary switch and
the air conditioner will switch off.
10
) will appear on the
Note: The SLEEP function is not available when in AUTO or
-
FAN mode.
USER
USER
USER
1