SPORTSTECH CX700 Benutzerhandbuch Seite 37

5.6 STEP 6
• Align the sensor bracket (10) with the holes in the upper section of the main tube (18). Guide the two
cables (3) of the pulse monitor through the hole into the main tube and then upwards through the
mounting plate (2).
• Fasten the sensor bracket to the main tube (18) with umbrella head hexagon screws (7), spring
washers (8) and washers (9), using an Allen wrench (109).
(109) 6mm (Qty 1)
EN DE
37