SPORTSTECH CX700 Benutzerhandbuch Seite 34

(33) M8×20 (Qty 4)
(31) Ø17xØ25 (Qty 4)
5.3 STEP 3
• First attach the corrugated washers (31) to both sides of the handle holder (11).
• Then slide the lower handle bars (27, 28) on both sides of the handle holder (11). Fasten them with the
hexagon screws (33), spring washers (8) and washers (34), using the socket wrench (64).
• With the Phillips screws (15), attach the front (23) and rear caps (69) to the handle holder (11), using
the cross-tip screwdriver (64).
34
(8) Ø8.5xØ13.5×2.5T (Qty 4)
(64) 6mm (Qty 1)
(34) Ø8xØ22×2T (Qty 4)