Emergency Mode; Other Risks - Meec tools 019801 Bedienungsanleitung

EN
• Discs must only be used for the
recommended applications. For example:
Do not grind with the side of a cutting
disc. Abrasive cutting discs are intended
for grinding with the outer edges. If lateral
forces are applied to these discs, they can
shatter.
• Always use undamaged disc flanges of the
right size and shape for the disc you have
chosen. Correct disc flanges support the
disc and therefore reduce the risk of the
disc breaking. Flanges for cutting discs can
differ from flanges for grinding discs.
• Do not use worn down discs from a larger
power tool. Discs from larger power tools
are not suitable for the higher speeds of
small tools and can shatter.
VIBRATION AND NOISE
ATTENUATION
To reduce the effects of noise and vibrations
you should limit the time in use, use the
low-vibration and low-noise modes, and
wear personal safety equipment. Observe the
following to minimise the risk of exposure to
vibrations and loud noise:
– Only use the power tool for the
purpose it was designed for, and in
accordance with these instructions.
– Make sure that the power tool is in
good condition and well maintained.
– Use the right accessories for the
power tool and make sure they are in
good condition.
– Keep a firm grip on the handles/
gripping surface.
– Maintain the power tool in
accordance with these instructions
and make sure it is well lubricated
(where applicable).
– Plan the work schedule to spread the
use of tools with heavy vibrations
over a longer period.
46

EMERGENCY MODE

Familiarise yourself with the use of this power
tool with the help of these instructions.
Commit the safety instructions to memory and
follow them to the letter. This will help you to
avoid risks and dangerous situations.
• Always pay attention when using this
power tool, so that you can detect and
handle risks at an early stage. Prompt
action can prevent serious personal injury
and material damage.
• Switch off the power tool and unplug it
from the power supply in the event of a
fault. Make sure the power tool is checked
by a qualified professional, and if
necessary repaired, before using it again.

OTHER RISKS

Even if you use this power tool in accordance
with all the safety instructions, there is still a
risk of personal injury and other damage. The
following hazards related to the design and
construction of this power tool can occur:
• Effects on health from vibration if the tool
is used for long periods, or is not handled
and maintained correctly.
• Personal injury and material damage as a
result of defective accessories and hitting
hidden objects when using the tool.
• Risk of personal injury and material
damage as a result of ejected objects.
• Damage to lungs (if an effective face mask
is not worn).
• Damage to ears (if effective ear protection
is not worn).
SYMBOLS
Read the instructions.
Wear eye and ear protection.