Use Multitabs; Adding Rinse Aid - hanseatic HGTI4582C10T7736ES Gebrauchsanleitung

Dishwasher detergents, rinse aids and dishwasher salts
4. Push the dispenser cover closed such that
the closure (33) clicks into place again.

Use multitabs

Many multitabs already contain dishwash-
er detergent, dishwasher salt and rinse aid,
meaning that you do not need to use these
three products separately. In this case, you
can ignore the "Add rinse aid"
dishwasher salt" (2) indicators.
If your water is in the
– "soft" to "medium" hardness range, multi-
tabs will deliver good results.
– "hard" range, we would recommend that
you do not use multitabs and instead use
dishwasher detergent, dishwasher salt
and rinse aid individually.
To determine and adjust the water
hardness see page EN-36.
1. Push the closure (33) of the dishwasher
detergent dispenser (24) sideways.
The cover will pop open.
2. Place a multitab in the dishwasher deter-
gent dispenser.
3. Push the dispenser cover closed such
that the closure clicks back into place.

Adding rinse aid

Risk of damage!
Excessive rinse aid can lead to increased
foaming and can compromise the rins-
ing results.
Wipe away rinse aid which has over-
■
flowed immediately.
Take note of the markings for the
■
maximum fill quantities ("max") in
the rinse aid chamber.
Using unsuitable substances can cause
damage to the dishwasher.
Only put rinse aids which are suita-
■
ble for dishwashers into the rinse aid
chamber.
(5) and "Add
you are exclusively using multitabs which
already contain rinse aid.
• Add rinse aid:
– prior to the first use,
– when the
As rinse aid is automatically dispensed during
operation, it ensures that the dishes are spot-
free and accelerates the drying process.
NOTICE
You do not need to add rinse aid to the
dishwasher detergent compartment if
indicator (5) lights up.
Page EN-13