Troubleshooting - Klarstein DOLCE BACIO SMART Bedienungsanleitung

Iced chocolate yoghurt
Ingredients:
200 ml whole milk
180 g dark chocolate
400 ml vanilla yoghurt
50 ml sugar

TROUBLESHOOTING

Problem
The bowl cannot be
removed after ice cream
production.
The production time of
the ice cream machine
(time mode) has not
expired but the ice
cream production has
still finished.
Ice cream production is
not yet complete, yet the
motor stops.
The unit has gone into
standby mode or is not
working as expected.
Preparation:
Mix the milk and chopped chocolate in a
blender with a metal blade for 20-30 seconds
until you get a smooth mixture. Add the
yoghurt and sugar and mix for another 15
seconds. Turn on the ice cream maker, pour
in the mixture, and blend for about 50-60
minutes until thick.
Potential cause
Frozen water drops
between the bowl
and the refrigerator
compartment.
With ice cream in
time mode, the
device is controlled
simultaneously by time
and hardness. If the ice
cream is hard before the
time has elapsed, ice
cream production stops.
The harder the ice cream
gets, the more likely it
is that the engine will
overheat.
The START/PAUSE button
may have been pressed
twice by mistake.
Solution
Wait 1-2 minutes before
removing the bowl.
This process is normal
and requires no action.
Switch off the unit, wait
3 minutes and then
restart the unit.
Press the START / PAUSE
button only once to start
a programme. If you
press the button twice,
the unit pauses and
automatically switches
to standby mode after a
certain time.
EN
39