Troubleshooting - Klarstein AQUEOUS Bedienungsanleitung

EN
34

TROUBLESHOOTING

Problem
Indicator light "Add water" is
permanently lit
Add water" indicator light flashes
quickly
The operation indicator flashes
The cold water indicator flashes
quickly
The indicator light for ice dispensing
lights up
The indicator light for ice dispensing
flashes quickly
The hot water indicator light flashes
quickly
The unlock indicator light flashes
quickly
Solution
Insert a new water bottle. Fill the
water tank with water up to the
maximum marking
Clean the water tank and make sure
that the water level measurement is
working correctly
Clean the water tank and make sure
that the water level measurement is
working correctly
Contact customer service
The cold water sensor is defective,
have it replaced
The ice bin is full, take out some ice
cubes
Sensor error "ice bin full", press the
ice making button for more than 5
seconds to start 20 ice making cycles
The motor is broken. Have this
replaced
The hot water sensor is defective.
Have this replaced
The ambient temperature sensor is
defective. Have this replaced