Technical Data; Noise/Vibration Information; Declaration Of Conformity - Bosch GST 80 PE Professional Originalbetriebsanleitung

OBJ_BUCH-618-001.book Page 18 Tuesday, January 22, 2008 12:58 PM
18 | English

Technical Data

Jigsaw
Article number
Stroke rate preselection
Orbital action
Rated power input
Output power
Stroke rate at no load n
0
Stroke
Cutting capacity, max.
– in wood
– in aluminium
– in non-alloy steel
Bevel cuts (left/right),
max.
Weight according to
EPTA-Procedure
01/2003
Protection class
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.

Noise/Vibration Information

Measured values determined according to
EN 60745.
Typically the A-weighted noise levels of the prod-
uct are: Sound pressure level 83 dB(A); Sound
power level 94 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Cutting wood: Vibration emission value
2
a =5 m/s , uncertainty K=1.5 m/s
h
Cutting sheet metal: Vibration emission value
2
a =4.5 m/s , uncertainty K=1.5 m/s
h
1 609 929 N41 | (22.1.08)
The vibration emission level given in this informa-
tion sheet has been measured in accordance
with a standardised test given in EN 60745 and
GST 80 PE
may be used to compare one tool with another. It
Professional
may be used for a preliminary assessment of ex-
0 601 582 8..
posure.
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with differ-
ent accessories or poorly maintained, the vibra-
W 580
tion emission may differ. This may significantly
W 350
increase the exposure level over the total work-
500 – 3100
spm
ing period.
An estimation of the level of exposure to vibra-
mm 26
tion should also take into account the times
when the tool is switched off or when it is run-
mm 80
ning but not actually doing the job. This may sig-
mm 20
nificantly reduce the exposure level over the total
mm 10
working period.
Identify additional safety measures to protect the
° 45
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
kg 2.4

Declaration of Conformity

/ II
We declare under our sole responsibility that the
product described under "Technical Data" is in
conformity with the following standards or
standardization documents: EN 60745 according
to the provisions of the directives 2004/108/EC,
98/37/EC (until Dec. 28, 2009), 2006/42/EC
(from Dec. 29, 2009 on).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
14.12.2007, Robert Bosch GmbH, Power Tools Division
2
,
D-70745 Leinfelden-Echterdingen
2
.
Dr. Eckerhard Strötgen
Head of Product
Certification
Bosch Power Tools