Intended Use; Product Features; Technical Data - Bosch PCM 8 SD Originalbetriebsanleitung

Please observe the illustrations at the beginning of this oper-
ating manual.

Intended Use

The power tool is intended as a stationary machine for mak-
ing straight cuts in wood with and against the grain. It is pos-
sible to cut mitre angles of -48° to +48° and bevel angles of
45° (to the left) to 45° (to the right).
The power tool is designed with sufficient capacity for saw-
ing hardwood and softwood as well as chipboard and fibre-
board.
This power tool is not suitable for sawing aluminium or other
non-ferrous metals.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Slide device
(2) Transport handle
(3) Laser warning label
(4) Lock-off button for on/off switch
(5) On/off switch
(6) Handle
(7) Protective guard
(8) Retracting blade guard
(9) Adjustable fence
(10) Length stop
(11) Saw table extension (stationary)
(12) Fixed fence
(13) Locking knob for all mitre angles
(14) Mitre presetting lever
(15) Tilt protector
(16) Insert plate
(17) Angle indicator for mitre angles
(18) Detents for standard mitre angles
(19) Scale for mitre angle
(20) Assembly holes
(21) Saw table
(22) Quick-action clamp
(23) Chip deflector
Roller
(24)
(25) Locking screw for slide device
(26) On/off switch for laser (cutting line indication)
(27) Chip ejector
(28) Transport safety lock
(29) Metal bar of tilt protector
(30) Clamping handle for various bevel angles
(31) Mounting holes for quick-action clamp
(32) Spindle lock
Bosch Power Tools
(33) Adjusting screw of depth stop
(34) Depth stop
(35) Cutting depth scale
(36) Cutting depth indicator
(37) Slider for laser unit
(38) Laser beam outlet aperture
(39) Angle indicator for right-hand bevel angle range
(40) Scale for bevel angles
(41) Stop screw for left-hand bevel angle range
(42) Standard bevel angle stop 45°, 22.5° and 33.9°
(to the left)
(43) Angle indicator for left-hand bevel angle range
(44) Stop screw for right-hand bevel angle range
(45) Standard bevel angle stop 45° (to the right)
(46) Stop screw for 0° bevel angle
(47) Stop for standard 0° bevel angle
(48) Clamping lever for the adjustable fence
(49) Hex key
(50) Clamping lever of the length stop
(51) Fastening screw for stationary saw table extension
(52) Opening for stationary saw table extension
(53) Dust bag
(54) Hex socket screw for mounting of saw blade
(55) Clamping flange
(56) Saw blade
(57) Interior clamping flange
(58) Quick release of quick-action clamp
(59) Locking knob of the quick-action clamp
(60) Wing bolt of the quick-action clamp
(61) Supporting bar of the quick-action clamp
(62) Mounting holes for horizontal fixing
(63) Saw table extension (flexible)
(64) Opening for flexible saw table extension (on the
power tool)
(65) Opening for flexible saw table extension (on the
stationary saw table extension)
Fastening screw for insert plate
(66)

Technical Data

Sliding mitre saw
Article number
Rated power input
No-load speed
Laser type
Laser class
English | 27
PCM 8 SD
PCM 800 SD
3 603 M11 0..
W 1200
5000
-1
min
nm 650
mW < 1
2
1 609 92A 4M8 | (04.12.2018)