Functional Description; Intended Use; Product Features - Bosch GST 80 PE Professional Originalbetriebsanleitung

OBJ_BUCH-618-001.book Page 17 Tuesday, January 22, 2008 12:58 PM
Always wait until the machine has come to a
complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Never use the machine with a damaged ca-
ble. Do not touch the damaged cable and pull
the mains plug when the cable is damaged
while working. Damaged cables increase the
risk of an electric shock.

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.

Intended Use

The machine is intended for making separating
cuts and cut-outs in wood, plastic, metal, ceram-
ic plates and rubber while resting firmly on the
workpiece. It is suitable for straight and curved
cuts with mitre angles to 45°. The saw blade rec-
ommendations are to be observed.
Bosch Power Tools

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Saw blade*
2 Guide roller
3 Contact protector
4 Base plate
5 Adjusting lever for orbital action
6 Switch for sawdust blowing device
7 On/Off switch
8 Thumbwheel for stroke rate preselection
9 Allen key
10 Screwdriver
11 Stroke rod
12 Splinter guard*
13 Scale for mitre angle
14 Screw
15 Positioning pin/mark
16 Bolt hole
17 Lead for the parallel guide
18 Locking screw for parallel guide*
19 Parallel guide with circle cutter*
20 Centring tip of the parallel guide*
*The accessories illustrated or described are not in-
cluded as standard delivery.
English | 17
1 609 929 N41 | (22.1.08)