Close A Lock; Close A Lock With Code Input; Close A Lock Automatically With Door Switch - Insys Elostar Master Kurzbedienungsanleitung

EloStar Master / EloStar Master smart

2.6.11 Close a Lock

When the lock locks after having been opened via OTC, a 4-digit reply code
CIT code: XXXX is displayed upon the operating unit. This code can be
passed on via telephone, for example, and it can be used by the person in
charge to end the process.
The reply code issued most recently can be displayed via menu Status / Info.
Press key Enter and release it after a second.
1.
The system checks its status. Date and time are on display.
With key < or > select Close and press key Enter.
2.
Close and, as the case may be, Lock 1 are on display.
If the lock is closed, menu Close cannot be selected.
3. With key < or > select the lock, if necessary, and press Enter.
Close | Please wait is on display. The lock bolt engages.
Close | Lock closed no. is on display.
You have successfully closed a lock.

2.6.12 Close a Lock with Code Input

In order to close a lock by entering code, either PIN- or card code (TwinCard
code access) is sufficient.
Press key Enter and release it after a second.
1.
The system checks its status. Date and time are on display.
2. With key < or > select Close and key Enter.
Close and, with a system with 2 or 3 locks, Lock 1 are on display.
3. If required, select the lock with menu key < or > and press Enter.
Code entry | User: Master is on display.
4. Present your user identification data.
User No | PIN code may on display, for example.
5. Select PIN-Code or Code card and enter code or insert card.
See the instructions 'Open a Lock by ...' at the beginning of this chapter.
Close | Please wait is on display. The lock bolt engages.
Close | Lock closed no. is on display.
You have successfully closed a lock.

2.6.13 Close a Lock Automatically with Door Switch

This option can be set via optional PC software.
• Close the door of the safe / box / container.
Via regular checks on the state of door- and bolt switches, the system registers
that the door has been closed and the system closes the locks automatically.
Other processes may be completed first.
The lock has closed / locked automatically.
Kurzbedienungsanleitung V.1.01D 38 Quick Reference Guide V.1.01D
Operation