Open Locks With Otc Flexible (Xx5) - INSYS EloStar Master Kurzbedienungsanleitung

EloStar Master / EloStar Master smart

2.6.10 Open Locks with OTC Flexible (XX5)

Only with EloStar Master (smart), product version XX5. OTC (one time code)
is also called single-use code. The use of OTC dependent requires that
several preconditions are fulfilled (see manual).
With the conditions for OTC flexible fulfilled, users can open locks
● (with personnel number,) with RFID card and OTC flex or
● with personnel number, with personnel PIN and OTC flex.
Settings see manual
Press key Clear and release it after immediately, and, if required,
1.
press key < or key > and key Enter in order to select Open.
With key < or key >, and key Enter select the lock, if required.
2.
Code entry | Standard is on display.
With key < or key > and with key Enter select Single access.
3.
Single access | Code entry | Staffnb: is on display.
Enter your personnel number and confirm with Enter, if required.
4.
Staffnb: and Code: are on display. The display indicates how to enter
code. See section „Entering PIN code".
CIT function | Code: is on display.
5. Enter your OTC flex.
Open | Please wait and, as the case may be,
System unlocked are on display. The lock bolt is retracted.
You have successfully opened the lock with personal PIN code and OTC flexible.
Kurzbedienungsanleitung V.1.01D 37 Quick Reference Guide V.1.01D
Operation