Change Pin Code - INSYS EloStar Master Kurzbedienungsanleitung

EloStar Master / EloStar Master smart

2.5.2 Change PIN Code

The lock master can register PIN code for users at the lock. Once their PIN
codes are registered, operators can change them with the system
unlocked. All employees / users can change their PIN codes. The steps
required for changing code are different depending on the system version.
Depending on the configuration, the message Trivial
display in case an operator tries to register PIN code with one digit only
(1,1,1,1,1...) or ascending or descending sequences of numbers
(1,2,3,4,5,... or 7,6,5,4,3...). In that case, these codes are not accepted due to
security reasons.
Within the grey boxes see the display menus.
Version xx0
Settings
With < or >
Master code
select PIN
PIN code
code and
Register
press
ENTER.
Confirm Register mit with ENTER.
Register
Change code
Kurzbedienungsanleitung V.1.01D
Hit the key CLEAR and release it immediately.
EloStar Master
Open
Code
Lock 1
Code
User Nr.01
User No.
Code:
New user code
Code:
Confirm code
Code:
Copy code?
*= YES * NO
PIN code
Please wait
User No.
Saved
With < or > select Settings and
press ENTER.
Version xx5
Settings
Manager code
With < or > select Employees and
PIN code
Change code
Confirm Change code with ENTER.
With < or with > select Lock 2, if
required, and press ENTER or select
Lock 1 with ENTER.
With numeric keys enter
the user number.
Enter the old code.
Enter new code.
Confirm the new code.
With < or with > select *=YES , if
required, and press ENTER in order
to copy the code to the other lock
or select *=NO with ENTER.
PIN code is changed successfully.
31 Quick Reference Guide V.1.01D
Operation
code is on
press ENTER.