Open A Lock With Dual Code; Open With Unlocking Delay And Release Time - Insys Elostar Master Kurzbedienungsanleitung

EloStar Master / EloStar Master smart

2.6.6 Open a Lock with Dual Code

Only if the two participating users carry out all kinds of authentication
assigned to them, the lock will open.
Press key Clear and release it after immediately, and, if required,
1.
press key < or key > and key Enter in order to select Open.
With key < or key >, and key Enter select the lock, if required.
2.
Code entry | Standard is on display.
Confirm Standard with key Enter, if required.
3.
With < and > and Enter or with numeric keys select your user number.
4.
According to your authorisation, with Enter select PIN code or with < and
5.
> select Code card and carry on as usual when opening.
See the instructions 'Open the Lock...' at the beginning of this chapter.
Another person is to perform the next step.
Code entry &2 | Master is on display.
6. A second operator enters code at the lock.
Open | Lock open: no. is on display.
With the help of another person, you have successfully opened the lock.

2.6.7 Open with Unlocking Delay and Release Time

This paragraph is a sequel of the last one.
1. Perform steps 1-5 of the last paragraph and be prepared to enter
code when indicated.
Code entry | Master is on display. An acoustic signal
indicates the end of the unlocking delay. During the release time,
which follows, an acoustic signal sounds every two seconds.
With < or > select the lock and press Enter, if required.
2.
Code entry | User: Master is on display.
With < and > and Enter or with numeric keys select your user number.
3.
4. Enter your code.
See step 4 of the last paragraph. An acoustic signal sounds repeatedly.
Open | Lock open: 1 is on display.
You have successfully opened the lock.
Kurzbedienungsanleitung V.1.01D 35 Quick Reference Guide V.1.01D
Operation