cecotec bolero SQUAD I 3000 Bedienungsanleitung Seite 63

Select the power by pressing the + and/or - buttons.
4
- If you do not select the power in 1 minute, the hob will turn off automatically. You must turn
it on again and return to step 1.
- You can modify the power any time while cooking.
If the display shows
This can mean:
- You have not placed the cookware in the correct cooking area.
- The cookware you are using is not suitable for the induction hob.
- The cookware is too small or is not centred correctly in the cooking area.
If you do not place a suitable cookware in the cooking area, it will not produce heat.
The display will turn off automatically after 2 minutes if you do not place any cookware.
Finishing the cooking
Fig. 17
Press the cooking area selection button from the area you wish to turn off.
1
To turn off the cooking area, press - until the value shows 0 or press the + and - buttons at
2
once. Make sure the display shows 0.
Turn off the hob completely by pressing the On/off button.
3
Caution with hot surfaces
Fig. 18
The hob will show H on any cooking area which is hot to the touch after use. The H will disappear
when the surface has cooled down and reached a safe temperature. You can also use a hot hob
to save energy if you wish to heat more frying pans.
Use of the Boost function
Activation of the Boost function
Fig. 19
Press the cooking area selection button.
1
Press the Boost button, the area indicator will show P and the power will reach the
2
maximum temperature.
Cancellation of the Boost function
Fig. 20
Press the Boost button or the - button to cancel the Boost function, and the cooking area
1
will return to the original setting.
Press the + and - buttons at once. The cooking area will turn off and the Boost function will
2
be automatically cancelled.
- This function can be activated in any cooking area.
and the power setting alternatively.
ENGLISH
BOLERO SQUAD I 3000
63