Appliance Description; Operating The Hob With The Touch Keys - Kaiser KCT-Serie Bedienungsanleitung

Appliance description

Appliance description
The decorative design may deviate from the illustrations.
1. Front left induction cooking zone
2. Back left induction cooking zone
3. Back right induction cooking zone
4. Front right induction cooking zone
5. Touch-Control operating panel
6. Control keys, front left cooking zone
7. Control keys, back left cooking zone
8. Timer control keys for the back right cooking zone
9. Control keys, back right cooking zone
10. Control keys, front right cooking zone
11. ON/OFF key
12. Minus key (lower)
13. Plus key (raise)
14. Power setting display

Operating the hob with the touch keys

The glass ceramic hob is operated by means of "touch control" sensor
keys which are located at the front of the hob.
The touch keys are operated as follows: with your fingertip, lightly
touch the symbols , or
For purposes of simplification, the following describes the "keys".
ON/OFFf key (11)
This key is used to switch the respective cooking zones on and off.
Minus key (12) Plus key
These keys are used to select the required power setting from 1 to 9.
Important! Pressing the two cooking zone keys for front left and front
right simultaneously will activate the child safety device on the left or
the right (symbol ).
Power setting display (14)
The power setting display shows the power setting which has been
selected, or if the cooking zone is switched off it will indicate
residual heat present.
The power setting display will blink for pan detection.
will be displayed when the safety cut-off device has switched off.
will be displayed when the child safety device has been activated.
A row of dashes or "F7" will be displayed when the overheat
protection device has been activated.
on the glass ceramic surface.
(13)
for
15