Display And Device Status Indicator/Led - Endress+Hauser RIA46 Bedienungsanleitung

RIA46 Operating elements and display
If access protection by means of a code should be extended to the software, this function should
be activated in the extended device setup.
For this purpose, select:
Menu É Expert É System É Overfill protect É German WHG and confirm.
5.2

Display and device status indicator/LED

The process display unit provides an illuminated LC display which is split into two sections. The
segment section displays the value of the channel and additional information and alarms.
In the dot matrix section, additional channel information, such as the TAG, unit or bar graph, is
displayed in the display mode. Operating text in English is displayed here during operation.
The parameters for configuring the display are explained in detail in Section 6.4.
a0010738
Fig. 6: Display of the process display unit
1: Channel display: 1: analog input 1; 2: analog input 2; 1M: calculated value 1; 2M: calculated value 2
2: Dot matrix display for TAG, bar graph and unit
3: Limit value indicators in the bar graph
4: "Operation locked" indicator
5: Green LED; on - supply voltage applied
6: Red LED; on - error/alarm
7: Yellow LED; on - relay 1 energized
8: Yellow LED; on - relay 2 energized
9: Minimum/maximum value indicator
Endress+Hauser 35