Assembling The Stand; Bracket - hanseatic HVS165DBMC Gebrauchsanleitung

page EN-18 First use
2. Mark out the drill holes.
The upper drill hole must be at
least 145 cm above the ground;
the distance between the drill
holes should be 4.7 cm.
3. Drill holes at the marked points,
using a diameter that can ac-
commodate the wall plugs.
(15)
4. Place the wall plugs into the
holes.
5. Attach the wall bracket (15) to
the wall using the two screws.

Assembling the stand

bracket

• Insert the upper part of the stand
bracket (13) into the bottom part
of the stand bracket (14).
(13)
(14)