First Use En; Unpacking The Appliance En; Mounting The Wall Bracket En - hanseatic HVS165DBMC Gebrauchsanleitung

First use
Unpacking the
appliance
NOTICE
Risk of damage!
Improper handling of the ap-
pliance may result in damage.
■ Do not use sharp objects to
unpack the appliance.
1. Unpack the appliance.
2. Carefully remove all parts of the
packaging, plastic profiles, tape
and foam padding.
Mounting the wall
bracket
WARNING
Risk of injury!
Improper installation of the
appliance can lead to injury.
■ Before drilling the holes, en-
sure that no wires or cables
(power, gas, water etc.) will
be damaged (check with a
line locator).
First use page EN-17
NOTICE
Risk of damage!
Improper handling of the ap-
pliance may result in damage.
■ Check the condition of the
wall before mounting the
wall bracket.
You should mount the wall bracket
before setting up the appliance.
You will need:
– 2 screws
– 2 suitable dowels
Tools and aids
You will need:
– screwdriver
– drill with drill bit suited to the
nature of the wall
– measuring tape / ruler
– level
– pencil
The upper drill hole must be
at least 145 cm above the
ground.
1. Start by drawing a vertical guide
line on the wall using a pencil.
It is best to use a spirit level for
this.