Important Safety And Wiring Instructions; Installation Site Selection; Safety And Compliance - Delta DC Wallbox-Ladegerat Installations- Und Bedienungshandbuch

Important Safety and Wiring Instructions

Installation Site Selection

DC Wallbox can be installed in both indoor and outdoor environments. It is necessary to consider the
installation conditions and protection at the site:
Follow local electrical regulation and installation standards

Consider the emergency routes at the installation site

Do not install the device at potentially explosive atmosphere areas (Ex areas).


Safety and Compliance

Read the manual before installation or usage of device.

Do not put tools, material or body parts into the electric vehicle connector.

Do not use the DC Wallbox charger if the cabinet, power cord or charging cable are frayed, have

broken insulation or show any other signs of damage.
Do not install or use the DC Wallbox charger if the enclosure is broken, cracked, open or shows

any other indications of damage.
The DC Wallbox charger should be installed only by a qualified technician.

Make sure that the materials used and the installation procedures follow local building codes

and safety standards.
The information provided in this manual in no way exempts the user of responsibility to follow all

applicable codes or safety standards.
The manufacturer is not responsible for physical injury, damage to property or damage to equip-

ment caused by the installation of this device.
This document provides instructions for the DC Wallbox charger and should not be used for any

other product. Before installation or use of this product, you should review this manual carefully
and consult with a licensed contractor, licensed electrician or trained installation expert to make
sure of compliance with local building codes and safety standards.
Installation and Operation Manual
Important Safety and Wiring Instructions
3