System Configuration; 3G Configuration - Delta DC Wallbox-Ladegerat Installations- Und Bedienungshandbuch

System Configuration

WARNING!
!
Only configure the charger when the charger is not in charging mode to avoid interruption of
an ongoing charging session.
Steps:
1. Contact service provider to login online configuration tool.
2. When the configuration is done, copy the parameter file (DeltaDCWallboxConfig) to the root of a
USB flash drive (the drive format should be FAT/FAT32, < 32GB).
3. Insert the USB flash disk into the USB port on the bottom (labeled USB). The configuration will
be uploaded to the DC Wallbox.
4. Remove the USB flash drive when the configuration is complete.
5. Close the protection cover. The cover has a hole to put padlock into it to avoid tampering.

3G Configuration

For models equipped with the 3G modem, insert a valid 3G (WCDMA) SIM card as detailed in previous
steps (page 15) to start 3G connection. Consult with local operator to activate data service on the SIM
card beforehand. Disable PIN check on the SIM card before inserting the card into the modem.
Installation and Operation Manual 20
System Configuration