Firmware Update - Delta DC Wallbox-Ladegerat Installations- Und Bedienungshandbuch

Request APN information from the operator and make sure APN is configured correctly via the configu-
ration tool.

Firmware Update

Firmware updates can be made via the USB port on the bottom of the cabinet.
1. Obtain a USB flash drive. The drive format should be FAT/FAT32, < 32GB.
2. Insert the USB flash disk into the USB port on the bottom of the unit (labeled USB).
The updated firmware is uploaded to the DC Wallbox.
The status is displayed on the panel.
3. When system finishes the update procedure, it restarts automatically.
4. Close the protection cover. The cover has a hole to put padlock into it to avoid tampering.
Installation and Operation Manual 21
System Configuration