Product Description And Specifications; Intended Use; Product Features - Bosch GCM 10 S Professional Originalbetriebsanleitung

OBJ_BUCH-1126-004.book Page 24 Thursday, November 27, 2014 6:23 PM
24 | English
Symbol Meaning
Observe the dimensions of the saw blade. The hole diameter
must match the tool spindle without play. Do not use reduc-
ers or adapters.
When transporting the machine, hold it only at the locations
indicated.
Do not dispose of power tools into house-
hold waste!
Only for EC countries:
According to the European Guideline
2012/19/EU for Waste Electrical and
Electronic Equipment and its implementa-
tion into national right, power tools that
are no longer usable must be collected
separately and disposed of in an environ-
mentally correct manner.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.

Intended Use

The power tool is intended as a stationary machine for making
straight lengthways and crossways cuts in wood. Horizontal
mitre angles of –52° to +62° as well as vertical bevel angles
of 0° to 45° are possible.
The power tool is designed with sufficient capacity for sawing
hard and softwood as well as press and particle board.
The power tool is not suitable for cutting aluminium or other
non-ferrous metals or alloys.

Product Features

The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Dust bag
2 Knurled nut of the depth stop
3 Blade guard
4 Locking lever
5 On/Off switch
6 Handle
7 Saw blade
1 609 92A 0XJ | (27.11.14)
8 Retracting blade guard
9 Fence
10 Scale for mitre angle
11 Insert plate
12 Locking bracket
13 Locking knob for various mitre angles
14 Mitre detent lever
15 Mitre angle indicator
16 Detents for standard mitre angles
17 Saw table
18 Mounting holes
19 Hex socket screws of the saw table extension
20 Drill holes for extension bars
21 Saw-table extension
22 Material clamp
23 Stop screw for 45° bevel angle
24 Stop screw for 0° bevel angle
25 Slide device
26 Locking screw for slide device
27 Extraction adapter
28 Hex socket screws (6 mm) of the fence
29 Mounting holes for material clamp
30 Hex key (size 6 mm)/cross-head screwdriver
31 Adjustment knob for 33.9° bevel angle
32 Bevel lock lever
33 Transport safety-lock
34 Adjusting screw of depth stop
35 Ring/open-end spanner
(ring: 13 mm; open-end: 12 mm)
36 Recessed handles
37 Chip ejector
38/39 Cross-head screw (attachment of retracting
blade guard)
40 Spindle lock
41 Hexagon bolt for saw-blade attachment
42 Washer
43 Clamping flange
44 Interior clamping flange
45 Extension bar*
46 Wing bolt
47 Threaded rod
48 Indicator for bevel angle
49 Screws for insert plate
50 Lock nuts of the depth stop
51 Depth stop
52 Material stop*
53 Screw for bevel angle indicator
54 Scale for bevel angle
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Bosch Power Tools