Disposal And Recycling - EINHELL GH-KS 2440 Originalbetriebsanleitung

Always wear heavy duty working gloves
•
Swing open the loading funnel (Fig. 5/Item
2) by opening the release screw (Fig. 5/ Item
12).
•
Undo the fastening nut (Figure 6a/Item B)
•
Undo the eight Philips screws (Figure 6b/Item
C) and remove the cover plate
•
Secure the rotary disk so that it cannot rotate
(for example by jamming it with a screwdriver,
see Figure 6c)
•
Undo the four blade screws (Figure 6c/Item
D) and remove the blades (Figure 6c/Item E)
•
Each of the blades can be turned once as
they are ground sharp on both ends. Then
they must be replaced by new blades.
To assemble, proceed in reverse order.
8.3 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info

9. Disposal and recycling

The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
Anl_GH_KS_2440_SPK7.indb 21 Anl_GH_KS_2440_SPK7.indb 21
GB
- 21 -
25.06.14 14:19 25.06.14 14:19