Troubleshooting Guide - EINHELL GH-KS 2440 Originalbetriebsanleitung

10. Troubleshooting guide

Fault
The machine does
not work
Shredding perfor-
mance unsatisfac-
tory
Anl_GH_KS_2440_SPK7.indb 22 Anl_GH_KS_2440_SPK7.indb 22
GB
Possible cause
- No power at the plug
- Machine is switched off
- Overload switch has tripped
- Ejector chute is blocked
- Loading funnel is not secure on the
motor housing
- Blades worn
- 22 -
Remedy
- Check the power cable and fuse
- Switch on machine
- Press control on overload switch
- Clean ejector chute
- Clean interior and tighten safety
screw
- Turn, sharpen or replace blades
25.06.14 14:19 25.06.14 14:19