Inhaltsverzeichnis
Werbung
Anleitung LH 2541-1_SPK7:_
Material is not drawn in by the shredder
The shredding blade rotates backwards
Check the direction of rotation
Material blockage in the funnel
Move the switch for selecting the direction of
rotation to position "0" and switch on the shredder.
Pull the material out of the funnel. Feed in thick
branches again so that the blade does not
immediately engage again in the notches it
previously cut.
The shredding blade is jammed
Move the switch for selecting the direction of
rotation to position "0" and switch on the shredder.
The blade will now rotate in the opposite direction
and release the jammed material.
Important! Do not change the direction of rotation
until the shredder has reached a complete stand-
still.
9. Care and maintenance
Clean the machine regularly. This will help to keep
the machine in good working order and is the
basis for a long working life.
Keep the vent slots clean while you work.
Clean the plastic body and other plastic parts with
a mild household cleaning agent and a damp
cloth. Do not use any aggressive agents or
solvents for cleaning purposes.
Never clean the shredder by spraying with water.
Prevent water getting inside the machine at all
cost.
Check the chassis securing screws from time to
time to ensure that they are tight.
If you do not intend to use the shredder for a
lengthy period, protect it from corrosion using
environmentally friendly oil.
10. Ordering replacement parts
Please quote the following data when ordering repla-
cement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
11.01.2007
15:41 Uhr
Seite 9
11. Waste disposal
Accessories and packaging should be disposed of in
an environment-friendly fashion, i.e. by taking them
to a recycling depot. Plastic parts are coded for pur-
poses of separation when recycling.
GB
9
Werbung
Inhaltsverzeichnis
Fehlerbehebung
