Disposal And Recycling; Cleaning, Maintenance And Ordering Of Spare Parts - EINHELL BG-RS 2540/1 Originalbetriebsanleitung

Anleitung_BG_RS_2540_1_SPK7:_
GB
Material is not drawn in by the shredder
The shredding blade rotates backwards
Check the direction of rotation
Material blockage in the funnel
Move the switch for selecting the direction of
rotation to position "⇑" and switch on the
shredder.
Pull the material out of the funnel. Feed in thick
branches again so that the blade does not
immediately engage again in the notches it
previously cut.
The shredding blade is jammed
Move the switch for selecting the direction of
rotation to position "⇑" and switch on the
shredder.
The blade will now rotate in the opposite
direction and release the jammed material.
Important! Do not change the direction of
rotation until the shredder has reached a
complete standstill.
8. Cleaning, maintenance and ordering
of spare parts
Always pull out the mains power plug before starting
any cleaning work.
8.1 Maintenance and storage
Clean the machine regularly. This will help to
keep the machine in good working order and is
the basis for a long working life.
Keep the vent slots clean while you work.
Clean the plastic body and other plastic parts
with a mild household cleaning agent and a
damp cloth. Do not use any aggressive agents or
solvents for cleaning purposes.
Never clean the shredder by spraying with water.
Prevent water getting inside the machine at all
cost.
Check the chassis securing screws from time to
time to ensure that they are tight.
If you do not intend to use the shredder for a
lengthy period, protect it from corrosion using
environmentally friendly oil.
Store the device in a dry room.
Store the device out of reach of children.
12
26.01.2012 13:20 Uhr Seite 12
8.2 Ordering replacement parts
Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info

9. Disposal and recycling

The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local council.