Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
If a slave with the ID code "A" (option of extended addressing
mode) is connected to a master of the first generation (version
2.0), an address between 1A and 31A must be assigned to this
slave.
* default setting
Operation
Check the reliable functioning of the unit. Indication by LEDs:
• LED 1 yellow:
• LED green:
• LED 2 red is lit:
• LED 2 red flashing:
Overload and short circuit of the input/output are signalled to
the AS-i master (version 2.1) via the "periphery fault" flag in the
status register.
Technical data
You can download the data sheet from the Internet if required
(www.ifm-electronic.com).
input/output switched
voltage supply o.k.
AS-i communication error, slave does not
participate in the normal" data exchange,
e. g. slave address 0
periphery fault, e.g. overload or short-cir-
cuit of the sensor supply /output
7
Werbung
Inhaltsverzeichnis
