Recommendations For A Proper Access To The Model - Modine ECO GDE-Serie Betriebsanleitung

8. Recommendations for a proper access to the model

Access
8 .1 Disconnect drain connection R1 and position it as to avoid hampering with fan shroud L1 .
8 .2 Remove deflector L6 and unfasten screws "A" of fan shroud L1.
8 .3 Bring fan shroud L1 to the position shown in drawing .
8 .4 Models with Ø315 mm fan motors only . To reach the heaters placed under the coil remove the inner drip trays L3 by
unfastening the self-threading screws "B" .
8 .5 It is possible to reach the header site by unfastening selfthreading screws "C" and removing the side panel L5 .
8 .6 Models with Ø350 mm fan motors are equipped with the safety system "D" that holds back the fan shroud L1 .
Reassembling
8 .7 Reposition the drip trays L3 and side panels L5 by fastening self threading screws "B" and "C" .
8 .8 Reposition the fan shroud L1 and fasten it with screws "A" .
8 .9 Reposition deflector L6 and reconnect drain connection R1.
L1 = Fan shroud
L2 = Sector
L3 = Inner drip tray
L4 = Supports
L5 = Side panel
L6 = Deflector
R1 = Drain connection
SD = Junction boxes (fans and heaters)
= Ground pole
Figure 4
29
www.modine.com